2019 Arctic Cat® ZR 8000 ES 137

2019 Arctic Cat® ZR 8000 ES 137

Swipe to View More

Exterior Colors:

  • Year 2019
  • Make Arctic Cat®
  • Model ZR 8000 ES
  • Engine Stator Output: 270W @3000 RPM
2019 Arctic Cat® ZR 8000 ES 137

2019 Arctic Cat® ZR 8000 ES 137

2019 Arctic Cat® ZR 8000 ES 137

Features may include:

8000 C-TEC2 ENGINE WITH DSI

The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class.

ARCTIC DRIVE SYSTEM

The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and delivers consistent performance without manual adjustments. It also features a 12.5 percent lower effective starting ratio (while maintaining the top ratio) for smoother engagement and reduced belt wear at drive-away speed, with more evenly distributed force for lower belt pressure. It’s a design that’s unique to Arctic Cat.

ARCTIC RACE FRONT SUSPENSION WITH ARCTIC CAT GAS IFP SHOCKS

The Arctic Race front suspension’s geometry was developed through racing. Our unique wide A-arm spacing complements the chassis design, which allows us to maintain a tighter suspension. Hydraulic twin tube shocks provide the dampening to smooth out the whoops and bumps.

SLIDE-ACTION REAR SUSPENSION WITH ARCTIC CAT IFP SHOCKS

The SLIDE-ACTION Rear Suspension™ brings race-day technology to everyday riding. Our U-shaped slot fits over a fixed shaft to allow a crucial half-inch of sliding movement. As the rear transfer blocks are engaged, the free-acting front arm follows the terrain, keeping your skis firmly planted over bumps and during aggressive cornering and acceleration. This significant detail controls ski lift during acceleration. Arctic Cat hydraulic twin tube shocks smooth out the chatter, mile after mile, for an even more comfortable ride.

Power Sport Gauge

All the information. All at your fingertips. There’s an odometer, trip meter, speedometer, engine hour, clock, fuel level indicator, reverse and warning lights, keeping you in tune with your machine.

12V OUTLET

Need to charge your phone or another electrical device? We’ve got you covered. Just plug in and power up while you ride

PUSH BUTTON START

This is just the thing for consistent, reliable starting. A simple push of a button is all you need to get up and running

ALL-NEW STEALTH LIGHTWEIGHT MASTER CYLINDER BRAKE SYSTEM

New for 2019, the Stealth lightweight master cylinder brake system features a new lever design for increased braking power with less required force compared to the previous design.

129-IN. RIPSAW & 137-IN. RIPSAW II TRACK WITH 1.25-IN. LUGS

Just say the name Ripsaw™ and one of the best trail tracks out there comes to mind. The 15” wide footprint with 1.25” lugs provide excellent durability and traction on groomed or hard-pack snow. Standard Ripsaw is available in 129? or the Ripsaw II is available in 137".

Engine

Engine Type 2-stroke
Displacement 794cc
Cooling Liquid
Cylinder Liners 2
Bore 85 mm
Stroke 70 mm
Lubrication Electronic injection
Ignition Digitally Controlled CDI
Engine Stator Output: 270W @3000 RPM
Fuel System Dual stage injection
Exhaust APV with tuned pipe, pipe sensor and stainless steel manifold and muffler
Fuel Type 91 Octane

Drivetrain

Drive/Driven Clutch CVT Auto-adjusting drive clutch / CVT lightweight driven clutch
Drive System Arctic Drive System
Brake System Type Stealth Hydraulic Master Cylinder
Clutch 0-5,000 ft.
Gears 21/41
Chain Pitch 86
Sprocket Chain 9 tooth, 2.86 pitch, involute
Reverse Push-button Engine

Suspension

Front Suspension Arctic Race Suspension with sway bar
Shock Absorber Arctic Cat IFP 1.5
Front Travel (in./cm.) 10 in.
Rear Suspension SLIDE-ACTION with 3 wheel rear axle assembly, coupling blocks, Torque-Sensing Link rear arm, and adjustable torsion springs
Front Shocks Arctic Cat IFP 1.5
Rear Shocks Arctic Cat IFP 1.5
Rear Travel (in./cm.) 13.5 in.

Dimensions

Overall Length 125 in.
Overall Width 47.75 in.
Overall Height 50.12 in.
Track Width 15 in.
Track Length 137 in.
Track Lug 1.25 in.
Track Pitch 2.86 in.
Ski Type ProCross - 6 in. | Stance: 42-43 in. Adjustable

Capacities

Fuel Capacity 11.7 gal.
Oil capacity 3.6 qt.
Cooling System 6.0 qt.

Weights

Dry Weight 513 lbs.

Other

Gauges Power Sport
Speedometer Digital
Tachometer Digital
Odometer Digital
Fuel Gauge Type Digital
Instrumentation Oil: Indicator Light | Coolant: Digital/Indicator Light | Clock: Digital | Battery Voltage: Digital | Altimeter: Digital | Hours: Digital

Features

Track Type Ripsaw II
Ski Runners Dual deep split runner w/carbide
12v-DC Outlet / RCA Outlet Standard
Electric Start Standard w/push button start
Hand & Thumb Warmers Standard
Headlight Type Dual halogen 2-bulb
Brake System Type Lightweight Brake Disc: Standard | Lever: Accessory
Mirrors Accessory
Seat Type Accessory | High Performance
Steering 5.5" riser with adjustable handlebar
Hitch/Type Tow: Accessory
Windshield 11" Mid-height
Features Body Plastics: Next Gen | Front Bumper: Sport | Goggle Holder: Accessory | Handguards: Standard | Heated Drivers Seat: Accessory | Ice Scratchers: Accessory | Mountain Strap: Accessory | Rear Rack: Accessory | Rear Storage: Tunnel Bag | Side Panel Wind Deflectors: Accessory | Tether Switch: Standard | Tunnel Flare: Accessory | Visor Plug-ins: Accessory

Product Photography